admin-service-show

This command is used to display information about admin services configuration.

Syntax   admin-service-show if if-string [scope local|fabric] [ssh|no-ssh] [nfs|no-nfs] [web|no-web] [web-ssl|no-web-ssl] [web-ssl-port web-ssl-port-number][web-port web-port-number] [snmp|no-snmp] [net-api|no-net-api] [icmp|no-icmp] [ntp|no-ntp]

if if-string

Specifies the interface.

Specify one or more of the following options:

ssh|no-ssh

Specifies if the switch is running Secure Shell (SSH) as a service.

nfs|no-nfs

Specifies if the switch is running Network File System (NFS) as a service.

web|no-web

Specifies if Web is running as a service.

web-ssl|
no-web-ssl

Specifies if SSL and certificates are used for Web services.

web-ssl-port web-ssl-port-number

Specifies the Web SSL port.

web-port web-port-number

Specifies the port for Web management.

web-log|no-web-log

Specify if you want to turn on or off Web logging.

snmp|no-snmp

Specifies if SNMP is running as a service.

net-api|no-net-api

Specifies if APIs are running as a service.

icmp|no-icmp

Specifies if Internet Control Message Protocol (ICMP) is running as a service.

ntp|no-ntp

Specifies if Network Time Protocol (NTP) is running as a service.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 3.0.0

The parameter, web-log|no-web-log, added.

Usage   Use this command to display information about admin services on the switch.

Examples  To display admin service information, use the following command:

CLI network-admin@switch > admin-service-show

switch      if   ssh nfs web web-ssl web-ssl-port web-port web-log snmp net-api icmp

----------- ---- --- --- --- ------- ------------ -------- ------- ---- ------- ----

draco-dev01 mgmt on  on  on  off     443          80       off     off  on      on   

draco-dev01 data on  on  on  off     443          80       off     off  on      on

 

See Also   

admin-service-modify

admin-sftp-modify

admin-sftp-show

admin-syslog-create

admin-syslog-delete

admin-syslog-modify

admin-syslog-show

admin-syslog-match-add

admin-syslog-match-modify

admin-syslog-match-remove

admin-syslog-match-show