This command is used to display information about a node from a fabric.

Syntax   fabric-node-show

name fabric-node-name

Specifies the name of the fabric node to display information.

id id-string

Specifies the identifier for the fabric node

serial serial-string

Specifies the serial string for the fabric node

fab-name fab-name

Specifies the name of the fabric node


Specifies the fabric identifier


Specifies the cluster identifier

fabric-network in-band|mgmt

Specifies the fabric network type.

control-network in-band|mgmt

Specifies the interface to send control plane communications.

local-mac mac-address

Specifies the local MAC address of the fabric

mgmt-ip ip-address

Specifies the IP address for the management NIC

mgmt-netmask netmask]

The netmask for the IP address

mgmt-mac mac-address

Specifies the MAC address for the management interface.

mgmt-vnet vnet-name

Specifies the management VNET.

mgmt-public-vlan vlan-id 

Specifies the public VLAN ID.

mgmt-secondary-mac mac-address

Specifies the secondary MAC address of the management interface

in-band-ip ip-address

Specifies the IP address for the in-band interface to the switch control plane.

in-band-netmask netmask

Specifies the netmask for the in-band interface to the switch control plane.

in-band-mac mac-address

Specifies the MAC address for the in-band interface to the switch control plane.

in-band-vnet vnet-name

Specifies the inband VNET name.

in-band-vlan vlan-id

Specifies the inband VLAN ID.

in-band-vlan-type public|private

Specifies the type of inband VLAN as public or private.

in-band-public-vlan vlan-id

Specifies the inband public VLAN ID.

in-band-secondary-mac mac-address

Specifies the secondary MAC address of the in-band interface

fab-tid fab-tid-number

Specifies the fabric identifier.

cluster-tid cluster-tid-number]

Specifies the cluster identifier.

out-port out-port-number

Specifies the port number where the switch multicasts the fabric discovery messages to other Pluribus Networks switch.

version version-string

Specifies the current ONVL version.

state offline|online|inband-only-
eula-required|fabric-required| fresh-install]

Specifies the state of the fabric.



Specifies if a firmware upgrade is required.



Specifies the state of the switch.

ports ports-number

Specifies the port list used by the fabric.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in nvOS Version 1.2.1.

Version 1.2

Command introduced.

Version 2.3.2

The parameters, cluster-id, cluster-tid, mgmt-assignment, mgmt-vm-nic-type, mgmt-nic, mgmt-vxlan, mgmt-if, mgmt-alias-on, mgmt-vm-nic-type, mgmt-exclusive, mgmt-nic-enable, mgmt-nic-state, and corresponding in-band parameters deprecated.

Version 2.4.1

The parameters, mgmt-vnet, mgmt-public-vlan, in-band-vnet, in-band-vlan-type, and in-band-public-vlan added.

Usage   The fabric consists of one or more switches that share an administrative domain. The fabric presents the abstraction of a big logical switch with a single point of management, hiding the complexity of the underlying collection of switch hardware and inter-switch links. Use this command to display node information.

Examples  To display a list of fabrics visible from the local switch, use the following command:

CLI network-admin@switch > fabric-node-show layout vertical

id:                     167772208

name:                   pubdev01

fab-name:               info-dev

fab-id:                 a000030:5537b46c

cluster-id:             a000030:1

fab-mcast-ip:           ::

local-mac:              64:0e:94:28:00:8e

fabric-network:         in-band


mgmt-mac:               64:0e:94:28:00:8f

mgmt-l3-port:           0



in-band-mac:            64:0e:94:28:00:8e

in-band-l3-port:        0


fab-tid:                8

cluster-tid:            1

out-port:               0

version:                2.2.202046923,pn-ONVL-2.2.4-2020412306

state:                  online

firmware-upgrade:       not-required

device-state:           ok

ports:                  0

See Also