This command is used to display IGMP routers on the network.

Syntax   igmp-router-show group-ip ip-address node-ip ip-address vlan vlan-id port port-number source ip-address node-type Host|Router expires expires-number(s)

group-ip ip-address

Specifies the IP address of the group router.

node-ip ip-address

Specifies the IP address of the host.

vlan vlan-id

Specifies the ID of the VLAN.

port port-number

Specifies the number of the port.

source ip-address

Specifies the IP address of the source router.

node-type host|router|switch

Specifies if the router is a host, router, or switch.

expires expires-number(s)

Specifies the ageout time on the IGMP router.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in Version 2.2.2

Usage   Use this command to display information about IGMP routers on the network.

Examples  To display information about IGMP routers on the network, use the following command:

CLI network-admin@switch > igmp-router-show

See Also