igmp-switches-show

This command is used to display switches with IGMP protocol enabled.

Syntax   igmp-switches-show [node-ip ip-address] [vnet vnet-name] [vlan vlan-id] [port port-number []

node-ip ip-address

Specifies the node IP address.

vnet vnet-name

Specify the name of the VNET assigned to the IGMP static source.

vlan vlan-id

Specify the VLAN identifier.

port port-number

Specify the port number.

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.3.3

Command introduced.

Version 2.4.1

The parameters, group-ip, node-type, expires, and source, deprecated. The parameters, vnet and vlan, added.

Usage   Displays information about IGMP switches.

Examples  To display IGMP switches, use the following syntax:

CLI network-admin@switch > igmp-switches-show

switch         node-ip vlan port

-------------- ------- ---- ----

spine-1        0.0.0.0 1    3    

spine-1        0.0.0.0 1    57   

spine-1        0.0.0.0 2    3    

spine-1        0.0.0.0 3    3