inline-service-show

The Inline Service feature manages service chains for Layer 1 Virtual Wire switches. The term, Inline Services, refers to services attached to a Layer 1 Virtual Wire switch such as Next-Generation Firewall (NGFW), Intrusion Detection System (IDS), Intrusion Prevention System (IPS), and Distributed Denial of Service attack (DDoS) Prevention.

When an Inline Service fails, a policy determines if traffic is allowed to bypass the Inline Services or if the traffic is blocked until the Inline Services recovers.

This command displays information about an inline service configuration.

Syntax   inline-service-show

i

name name-string

Displays a name for the Inline Service.

tx-port port-list

Displays the ports to send the Inline Service.

rx-port port-list

Displays the ports to receive the Inline Service.

status down|up

Displays the status of the inline service.

heartbeat service-heartbeat name | none

Specify the service heartbeat.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   Network Administrator

History   .

Version 2.6.0

Command introduced.

Version 3.0.0

The parameter, heartbeat service-heartbeat, added.

Usage   Use this command to display information about an Inline Service configuration.

Examples  To display an Inline Service configuration, use the following syntax:

CLI network-admin@switch > inline-service-show

switch      name tx-port      rx-port     

---------- ---- ------------ -----------

Leaf1      IDS   1            2              

Leaf1      FW    10           20

Leaf1      FW    40           40

See Also   Command See Also