ipfix-collector-modify

IPFIX (Internet Protocol Flow Information Export) is an IETF protocol created by the need for a common, universal standard of export for Internet Protocol flow information from routers, probes and other devices that are used by mediation systems, accounting/billing systems and network management systems to facilitate services such as measurement, accounting and billing. The IPFIX standard defines how IP flow information is to be formatted and transferred from an exporter to a collector.

Syntax   ipfix-collector-modify name name-string host host-string port port-number transport-protocol tcp|udp|icmp|igmp|ip

name name-string

Name of the IPFIX collector

host host-string

IP address of the IPFIX collector

port port-number

Listening port of the IPFIX collector - the default port is 9090.

transport-protocol tcp|udp|icmp|igmp|ip

Transport protocol to collect - the default is TCP.

Defaults   None

Access   CLI

History   

Version 2.4.0

Command introduced.

Version 2.6.2

The parameter, dscp, deprecated.

Usage   Use this command to modify an IPFIX collector on a host.

Examples  To modify IPFIX collector, ipfix-host1, to collect protocol tcp, and DSCP value 3, use the following command:

CLI network-admin@switch > ipfix-collector-modify name ipfix-host1 transport-protocol tcp dscp 3

See Also   

ipfix-collector-create

ipfix-collector-delete

ipfix-collector-show