l3-table-show

This command allows you to display the Layer 3 table settings.

Syntax   l3-table-show

Specify one or more of the following options:

mac mac-address

Displays the MAC address.

ip ip-address

Displays the IP address.

vnet vnet-name

Displays the name of the VNET.

l2-net l2-net-name

Displays the name of the Layer 2 network.

vlan id5

Displays the VLAN ID.

public-vlan vlan-id

Specify the public VLAN assigned to the vPort

vxlan id

Displays the assigned VXLAN.

intf intf-number

Displays the interface.

rt-if rt-if-string

Displays the router interface.

hw-intf hw-intf-number

Displayss the interface programmed in hardware.

state active|static|vrrp|tunnel|
software|needs-peer-status|port-mac| hit|ageout-check|
moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-
loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|    peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|    hsrp

Displays the flags.

owner-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac| hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac| user-flush|vxlan-loopback|
router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|    peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|    hsrp

Displays the owner-state flags.

peer-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac| hit|ageout-check|
moving|loop-probe|local-tunnel|igmp-mac| user-flush|
vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|    hsrp

Displays the peer-state flags.

egress-id egress-id-number 

Displays the hardware egress ID.

create-time date/time: yyyy-mm-ddThh:mm:ss

Displays the time entry created.

last-seen date/time: yyyy-mm-ddThh:mm:ss

Displays the last time seen on network.

hit hit-number

Displays the number of hits.

tunnel tunnel-string 

Displays the tunnel name.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.4

Command introduced.

Version 2.4.1

The parameters, public-vlan, owner-state, peer-state and tunnel added. The options, user-flush|vxlan-loopback|router added to state, owner-state, and peer-state.

Version 2.6.2

The parameters, hw-intf and egress-id added. The options update-peer-only|active-state-mismatch|
peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|hsrp
added to state, owner-state, peer-state.

Version 3.0.0

The parameter, l2-net, added.

Usage   Use this command to show the Layer 3 table setting.

Examples  To display the Layer 3 table setting, use the following command:

CLI network-admin@switch > l3-table-show format all

switch:

spine1-1

mac:

c6:8f:66:55:fe:30

ip:

192.168.1.3

vlan:

1

vxlan:

0

intf:

128

rt-if:

 

state:

active

create-time:

10-06,15:58:02

last-seen:

09:06:44

hit:

1764

There is no routing interface (rt-if) value because there are no Layer 3 routes configured on the switch.