mld-switches-show

This command is used to display switches with MLD protocol enabled.

Syntax   mld-switches-show [node-ip ip-address][vnet vnet-name] [vlan vlan-id][port port-number]

node-ip ip-address

Specifies the node IP address.

vnet vnet-name

Specifies the name of the VNET assigned to the MLD configuration.

l2-net l2-net-name

Specifies the name of the Layer 2 network.

vlan vlan-id

Specifies the ID of the VLAN for the MLD configuration.

port port-number

Specifies the port number.

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.3.3

Command introduced.

Version 2.4.1

The parameters, group-ip, source-ip, node-type, and expires, deprecated. The parameter, vnet,vlan added.

Version 3.0.0

The parameter, l2-net, added.

Usage   Displays information about MLD switches.

Examples  To display MLD switches, use the following syntax:

CLI network-admin@switch > mld-switches-show

switch:     spine-1

node-ip:    ::

vlan:       1

port:       3

switch:     leaf-1

node-ip:    ::

vlan:       2

port:       3

switch:     leaf-2

node-ip:    ::

vlan:       3

port:       3