openstack-config-node-show

OpenStack is a cloud operating system that controls large pools of compute, storage, and networking resources throughout a data center. This command is used to display information about an OpenStack node on a VNET.

Syntax   openstack-config-node-show openstack-name name-string openstack-bridge-vnic-nic nic-string [hostname hostname-string] addr ip-address macid mac-address [type controller|compute|unknown] platform platform-string 
[status online|offline|installing|failed]

openstack-name name-string

Specifies the name of the OpenStack node.

openstack-bridge-vnic-nic nic-string

Specifies the name of the virtual NIC assigned to theinterface.

Specify the following node arguments:

hostname hostname-string

Specifies the host name for the node.

addr ip-address

Specifies the IP address for the node.

macid mac-address

Specifies the MAC address for the node.

type controller|compute|
unknown

Specifies the type of node.

platform platform-string

Specifies the type of platform.

release release-string 

Specifies the OpenStack release on the node.

status online|offline|
installing|failed

Specifies the status of the node.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.0

Command introduced.

Version 2.3

The parameters, platform and release, added.

Version 2.3.1

Command changed to openstack-config-node-show.

Usage   Use this command to display information about a node in the OpenStack instance.

Examples  To display a node, openstack-node1, host name, openstack, IP address 192.168.1.15 type controller, use the following command:

CLI (network-admin@aquila13) > openstack-config-node-show

openstack-name hostname            addr        macid             type       status

-------------- --------------- ----------- ----------------- ---------- ------

ops202        controller      100.202.1.2 66:0e:94:23:3c:24 controller online

ops202        compute-100-202 100.202.1.3 00:e0:81:e4:02:97 compute    online

See Also