port-buffer-show

You can display the buffer utilization, percentage and size, for ports on a switch.

Syntax   port-buffer-show time date/time: yyyy-mm-ddThh:mm:ss start-time date/time: yyyy-mm-ddThh:mm:ss end-time date/time: yyyy-mm-ddThh:mm:ss duration duration: #d#h#m#s interval duration: #d#h#m#s since-start older-than duration: #d#h#m#s within-last duration: #d#h#m#s port port-list

time date/time: yyyy-mm-ddThh:mm:ss

Specify a time to display port buffering.

start-time date/time: yyyy-mm-ddThh:mm:ss

Specify a start time to display port buffering.

end-time date/time: yyyy-mm-ddThh:mm:ss

Specify a end time to display port buffering.

duration duration: #d#h#m#s

Specify a duration to display port buffering.

interval duration: #d#h#m#s

Specify an interval to display port buffering.

since-start

Specify a start time to display port buffering.

older-than duration: #d#h#m#s

Specify an older-than time period to display port buffering.

within-last duration: #d#h#m#s

Specify a within last time period to display port buffering.

port port-list

Specify a port list.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in Version 2.2.1.

Usage   In some cases, you may want to buffer packets leaving and entering the ports on the switch.

Examples  To display the buffer information, use following command:

CLI network-admin@switch > port-buffer-show format all layout vertical

switch:               Pleiades24

port:                 65

ingress-used-buf:     0%

ingress-used-buf-val: 0

egress-used-buf:      0%

egress-used-buf-val:  0

switch:               Pleiades24

port:                 66

ingress-used-buf:     0%

ingress-used-buf-val: 0

egress-used-buf:      0%

egress-used-buf-val:  0

switch:               Pleiades24

port:                 69

ingress-used-buf:     0%

ingress-used-buf-val: 0

egress-used-buf:      0%

egress-used-buf-val:  0

switch:               Pleiades24

port:                 70

ingress-used-buf:     0%

ingress-used-buf-val: 0

egress-used-buf:      0%

egress-used-buf-val:  0

switch:               Pleiades24

port:                 71

ingress-used-buf:     0%

ingress-used-buf-val: 0

egress-used-buf:      0%

egress-used-buf-val:  0

switch:               Pleiades24

port:                 72

ingress-used-buf:     0%

ingress-used-buf-val: 0

egress-used-buf:      0%

egress-used-buf-val:  0