port-cos-bw-show

You can modify bandwidth guarantees on switch ports. Currently, Pluribus Networks switches allow rate limiting only for CPU facing (PCIe, data and span) ports. Using this feature, you can configure bandwidth guarantees at egress CoS (Class of Service) queue level and manage prioritized traffic. The feature is also used for setting SLAs (Service Level Agreements).

Syntax   port-cos-bw-show

i

cos integer

Specify the CoS priority between 0 and 7.

port port-list

Specify the physical port(s).

min-bw-guarantee min-bw-guarantee-string

Specify the minimum bandwidth as a percentage.

max-bw-limit max-bw-limit-string

Specify the maximum bandwidth as a percentage.

weight priority 

Specify the scheduling weight after the bandwidth guarantee is met.

Formatting Options

(show commands only)

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   Network Administrator

History   

Version 2.6.0

Command introduced.

Version 3.0.0

The parameter, weight, added.

Usage   Use this command to display CoS bandwidth information for a port or range of ports.

Examples  To display the CoS bandwidth, use the following syntax:

CLI (network-admin@Spine1) > port-cos-bw-show

 

switch      cos port  min-bw-guarantee max-bw-limit weight

----------- --- ----- ---------------- ------------ ------

Spine1      0   1-104 0%               100%         16     

Spine1      1   1-104 0%               100%         32     

Spine1      2   1-104 0%               100%         32     

Spine1      3   1-104 0%               100%         32     

Spine1      4   1-104 0%               100%         32     

Spine1      5   1-104 0%               100%         32     

Spine1      6   1-104 0%               100%         64     

Spine1      7   1-104 0%               100%         127

See Also