port-egress-fix

You can use this command to fix fabric communications when a connection error occurs while using show commands.

Syntax   port-egress-fix

Defaults   None

Access   CLI

History   Command introduced in Version 2.2.6

Usage   Occasionally, the fabric returns a communication error when show commands are executed at the CLI. This command fixes communication errors on fabric ports.

Examples  To use this command, use the following syntax:

CLI network-admin@switch > port-egress-fix

pubdev02: Port 1 -> 1-68 but should be 1 -> 1-72

pubdev02: Fixed port 1 -> 1-72

pubdev02: Port 2 -> 1-68 but should be 2 -> 1-72

pubdev02: Fixed port 2 -> 1-72

pubdev02: Port 3 -> 1-68 but should be 3 -> 1-72

pubdev02: Fixed port 3 -> 1-72

pubdev02: Port 4 -> 1-68 but should be 4 -> 1-72

pubdev02: Fixed port 4 -> 1-72

pubdev02: Port 5 -> 1-68 but should be 5 -> 1-72

pubdev02: Fixed port 5 -> 1-72

pubdev02: Port 6 -> 1-68 but should be 6 -> 1-72

pubdev02: Fixed port 6 -> 1-72

pubdev02: Port 7 -> 1-68 but should be 7 -> 1-72

pubdev02: Fixed port 7 -> 1-72

pubdev02: Port 8 -> 1-68 but should be 8 -> 1-72

pubdev02: Fixed port 8 -> 1-72

pubdev02: Port 9 -> 1-68 but should be 9 -> 1-72

pubdev02: Fixed port 9 -> 1-72

pubdev02: Port 10 -> 1-68 but should be 10 -> 1-72

pubdev02: Fixed port 10 -> 1-72

pubdev02: Port 11 -> 1-68 but should be 11 -> 1-72

pubdev02: Fixed port 11 -> 1-72

pubdev02: Port 12 -> 1-68 but should be 12 -> 1-72

pubdev02: Fixed port 12 -> 1-72

pubdev02: Port 13 -> 1-68 but should be 13 -> 1-72

pubdev02: Fixed port 13 -> 1-72

pubdev02: Port 14 -> 1-68 but should be 14 -> 1-72

pubdev02: Fixed port 14 -> 1-72

pubdev02: Port 15 -> 1-68 but should be 15 -> 1-72

pubdev02: Fixed port 15 -> 1-72

See Also   

port-egress-check

port-egress-show