port-xcvr-show

This command is used to display information about a transceiver installed in a port on the switch.

Syntax   port-xcvr-show

port port-list

Displays the port list.

vendor-name vendor-name-string

Displays the vendor name for the transceiver.

part-number part-number-string

Displays the part number of the transceiver.

serial-number serial-number-string

Displays the serial number.

supported Yes|Warning! Not supported

Displays information about supported transceivers.

temperature[C] temperature[C]-number

Displays the port temperature in degrees Centigrade.

vout[mV] vout[mV]-number

Displays the voltage in millivolts.

tx-bias1[mA] tx-bias1[mA]-string

Displays the transmit bias current (mA).

tx-pwr[dBm] tx-pwr[dBm]-string

Displays the transmit power (dBm).

rx-pwr[dBm] rx-pwr[dBm]-string

Displays receive power (dBm).

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   .

Version 1.2.1

Command introduced.

Version 2.6.0

Transmit and receiver parameters added for lanes.

Usage   Used to display information about SFPs installed in ports on the switch.

Examples  

CLI network-admin@switch > port-xcvr-show

switch:        aquila-ext-43

port:          8

vendor-name:   PluribusNetworks

part-number:   QSFP40-CU0P5M

serial-number: V05B6082

supported:     Yes

temp[C]:         0.00

vcc[V]:        0.00

tx-bias1[mA]:   0.00

tx-bias2[mA]:   0.00

tx-bias3[mA]:   0.00

tx-bias4[mA]:   0.00

rx-pwr1[dBm]:   -Inf

rx-pwr2[dBm]:   -Inf

rx-pwr3[dBm]:   -Inf

rx-pwr4[dBm]:   -Inf

 

 

See Also   

port-show

port-config-modify

port-config-show

port-stats-clear

port-phy-show

port-stats-show

port-vlan-add

port-vlan-remove

port-vlan-show