service-heartbeat-show

Netvisor generates a packet from the CPU to send to the receive port of an Inline Service and the Netvisor vFlow configured for snooping is not port-specific, as Netvisor accepts the response from either the receive port or the transmit port. You configure the heartbeat as an additional parameter for a specific Inline Service.

Syntax   service-heartbeat-show

i

name name-string

Displays the name for the Heartbeat Service.

interval duration: #d#h#m#s

Displays the interval between heartbeat packets.

retry retry-number

Displays the number of times to retry sending a packet.

vlan vlan-id5

Displays a VLAN ID.

src-mac mac-address

Displays the source port MAC address.

dst-mac mac-address 

Displays the destination MAC address.

type normal|pass-through

Displays the type of heartbeat response as normal or passthrough. A normal response indicates that the Inline Service sends the response. A passthrough response indicates that Netvisor sends the response and returns it to the Inline Service.

payload payload-string

Displays the payload for the heartbeat packet.

Syntax

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to display information about a Hearbeat Service configuration.

Examples  To display information about a Hearbeat Service configuration, use the following syntax:

CLI network-admin@switch > service-heartbeat-show

See Also