switch-config-show

This command is used to display configuration information about a switch.

Syntax   switch-config-show import-file name-string export-file name-string [apply-system-config|ignore-system-config
|do-fabric|skip-fabric-join] [replace-switch|no-replace-switch]

import-file name-string

Specifies the name of the imported configuration file.

export-file name-string

Specifies the name of the exported configuration file.

replace-switch|
no-replace-switch

Specifies if replacing a current switch.

upgrade-location-mappings upgrade-location-mappings-string

Specify    hostid=locationid comma separated list to upgrade old config.

upload-server upload-server-string

Specify if you want to upload the configuration file to a server using Secure Copy Protocol (SCP).

server-password server-password-string

Specify the SCP host password.

 

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.6.0

The parameters, upgrade-location-mappings, added.

Version 3.0.0

The parameters, upload-server and server-password added to support SCP.

Usage   Use this command to display information about import and export file settings on the switch.

Examples  To display the configuration, use the following command:

CLI network-admin@switch > switch-config-show

switch   export-file                                           

-------- -----------------------------------------------------

pubdev01 switch-config-reset-backup.2014-10-22T13.14.53.tar.gz

pubdev01 test.2014-02-24T09.06.51.tar.gz                       

pubdev01 switch-config-reset-backup.2014-06-30T12.23.10.tar.gz

pubdev01 ext13base.2013-12-11T06.50.40.tar.gz                  

pubdev02 switch-config-reset-backup.2014-06-30T13.11.43.tar.gz

pubdev02 switch-config-reset-backup.2014-10-22T13.39.18.tar.gz

pubdev02 mantis-switch-config.2013-10-10T10.13.23.tar.gz     

pubdev02 switch-config-reset-backup.2015-01-21T10.55.14.tar.gz

pubdev03 switch-config-reset-backup.2014-12-08T16.35.58.tar.gz

pubdev03 switch-config-reset-backup.2014-12-08T17.30.42.tar.gz

See Also   

switch

switch-config-export

switch-config-import

switch-config-copy-to-export

switch-config-copy-to-import

switch-info-show

switch-reboot

switch-setup-modify

switch-setup-show

switch-status-show