switch-info-show

This command displays information about the switch.

Syntax   switch-info-show

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   Command introduced in nvOS Version 1.2.1.

Usage   Use this command to display information about the switch.

Examples  To display information about the switch, use the following command:

CLI network-admin@switch > switch-info-show

switch:              draco-dev01

model:               S6000-ON

chassis-serial:      1741PN8500213

cpu1-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

cpu2-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

cpu3-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

cpu4-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

system-mem:          7.66G

switch-device:       OK

fan1-status:         OK

fan2-status:         OK

fan3-status:         OK

fan4-status:         OK

fan5-status:         OK

fan6-status:         OK

ps1-status:          OK

ps2-status:          FAULT

disk-model:          16GB SATA Flash Drive                   

disk-firmware:       SFDDA01C

disk-size:           14.9G

disk-type:           Solid State Disk, TRIM Supported

bios-vendor:         American Megatrends Inc.

bios-version:        4.6.5

 


 

Informational Note:  The show output information varies from platform to platform.

See Also   

switch

switch-config-export

switch-config-import

switch-config-copy-to-export

switch-config-copy-to-import

switch-reboot

switch-setup-modify

switch-setup-show

switch-status-show