system-stats-show

This command is used to display information about system statistics.

Syntax   system-stats-show [time date/time: yyyy-mm-ddThh:mm:ss][start-time date/time: yyyy-mm-ddThh:mm:ss] [end-time date/time: yyyy-mm-ddThh:mm:ss] [duration duration: #d#h#m#s] [interval duration: #d#h#m#s][older-than duration: #d#h#m#s] [within-last duration: #d#h#m#s s] [uptime duration: #d#h#m#s] [paging duration: #d#h#m#s]

time date/time: yyyy-mm-ddThh:mm:ss

Specifies a specific time and date to display statistics.

start-time date/time: yyyy-mm-ddThh:mm:ss

Specifies the start time of the system stats.

end-time date/time: yyyy-mm-ddThh:mm:ss

Specifies the end time of the system stats.

duration duration: #d#h#m#s

Specifies the duration in the format #d#h#m#s

interval duration: #d#h#m#s

Specifies the number of seconds to reprint the system stats to the CLI.

older-than duration: #d#h#m#s

Specifies stats older than a specific duration.

within-last duration: #d#h#m#s s

Specifies stats that occurred within the last duration.

uptime duration: #d#h#m#s

Specifies the uptime of the switch.

paging paging-number

Specifies the number pages collected.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

 

Defaults   None.

Access   CLI

History   

Version 1.2.1

Command introduced.

Version 3.0.0

The parameter, cpu-total, added.

Usage   Use this command to display system statistics.

Examples  To display system statistics, use the following command:

CLI network-admin@switch > system-stats-show format all layout vertical

switch:        draco-dev01

uptime:        9m35s

used-mem:      50%

used-mem-val:  3.80G

used-swap:     0%

used-swap-val: 0

paging:        0

cpu-user:      30%

cpu-sys:       16%

cpu-total:     47%

cpu-idle:      52%

 

See Also   

service-stats-show