user-create

This command is used to create users on the local switch or fabric.

Syntax   user-create name name-string scope local|fabric password password-string initial-role role name 

name name-string

Specify a name for the user.

scope local|fabric

Specify a scope for the user. Select local to allow access to the local switch only. Selecting fabric allows access to the fabric.

password password-string

Specify a password for the user.

initial-role role name

Optionally, specify the initial role for the user.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.1

The parameters, password and initial-role, added.

Usage   Use this command to create users on the local switch or fabric. When you specify a role, it is a role defined using the role- commands.

Examples  To create the user, net-access, password, sw0rdf1ght, on the fabric, use the following command:

CLI network-admin@switch > user-create name netaccess scope fabric

password:

Confirm password:

 

See Also   

user-delete

user-modify

user-show

user-role-add

user-role-remove

user-role-show

user-password-set