vlag-stats-clear

This command is used to clear collected statistics from a VLAG configuration.

vlag-stats-clear:

time date/time: yyyy-mm-ddTHH:mm:ss

Display by date and time.

start-time date/time: yyyy-mm-ddTHH:mm:s

Display by start date and time.

end-time date/time: yyyy-mm-ddTHH:mm:ss

Display by end date and time.

duration duration: #d#h#m#s

Display by duration.

interval duration: #d#h#m#s

Display by interval.

since-start

Specify a start time for the statistics.

older-than duration: #d#h#m#s

Display statistics older than a specific date.

within-last duration: #d#h#m#s

Display statistics within a specific duration.

tunnel-name tunnel-name

Display by tunnel name.

counter counter-number

Displays the number of counters.

ibytes ibytes-number

Displays the number of incoming bytes.

ibits ibits-number

Displays the number of incoming bits.

iUpkts iUpkts-number

Displays the number of incoming Unicast packets.

iBpkts iBpkts-number

Displays the number of incoming Broadcast packets.

iMpkts iMpkts-number

Displays the number of incoming Multicast packets.

iPauseFs
iPauseFs-number

Displays the number of incoming Pause frames.

iCongDrops iCongDrops-number

Displays the number of incoming packets dropped due to congestion.

ierrs errs-number

Displays the number of incoming packets with errors.

obytes obytes-number

Displays the number of outgoing bytes.

obits obits-number

Displays the number of outgoing bits.

oUpkts oUpkts-number

Displays the number of outgoing Unicast packets.

oBpkts oBpkts-number

Displays the number of outgoing Broadcast packets.

oMpkts oMpkts-number

Displays the number of outgoing Multicast packets.

oPauseFs
oPauseFs-number

Displays the number of outgoing Pause frames.

oCongDrops oCongDrops-number

Displays the number of outgoing packets dropped due to congestion.

oerrs oerrs-number

Displays the number of outgoing packets with errors.

mtu-errs mtu-errs-number

Displays the number of MTU errors.

HER-pkts HER-pkts-number

Displays the number of head-end replicated packets.

HER-bytes HER-bytes-number

Displays the number of head-end replicated bytes.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to clear statistics about a VLAG configuration.

Examples  To clear statistics for a VLAG configuration, use the following syntax:

CLI network-admin@switch > vlag-stats-clear

 

See Also