vnet-manager-interface-show

This command is used to display information about configured virtual network (VNET) manager interfaces.

Syntax   vnet-manager-interface-show

vnet-manager-name name-string

Specifies the name for the VNET manager interface.

Specify the following interface arguments:

nic nic-string

Specifies the NIC of the interface.

ip ip-address

Specifies the IP address of the interface.

netmask netmask

Specifies the netmask.

assignment none|dhcp|dhcpv6|autov6

Specifies the DHCP method.

mac mac-address

Specifies the MAC address of the interface.

vnet vnet-name

Specifies the name of the VNET.

vlan vlan-id

Specifies the VLAN identifier. This is a value between 1 and 4094.

vlan-type public|private

Specifies the VLAN type as public or private.

if mgmt|data|span

Specifies if the interface is a management, data or span interface.

alias-on alias-on-string

Specifies an alias for the interface.

vm-nic-type e1000|virtio

Specifies the type of virtual NIC.

exclusive|
no-exclusive

Specifies if the interface is exclusive to the configuration. Exclusive means that other configurations cannot use the interface.

nic-enable|
nic-disable

Specifies if the NIC is enabled or disabled.

nic-state down|up

Specifies if the NIC state is up or down. If the NIC is disabled, then the state is down.

vrrp-id id

Specify the ID assigned to VRRP. Range is 0 - 255.

vrrp-primary vrrp-primary-string

Specify the VRRP primary interface.

vrrp-priority number

Specify the VRRP priority for the interface. Range is 0 - 254.

vrrp-adv-int ms

Specify the VRRP Advertisement Interval. In ms, min 10, max 40950, default 1000.

secondary-macs secondary-macs-string

Specifies a secondary MAC address.

if-nat-realm internal|external

Specify a NAT realm interface as internal or external.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.1

The parameters, exclusive, nic, and nic-state, added.

Version 2.2.5

The parameters, l3-port, and secondary-macs, added.

Version 2.3.1 

The option, autov6, added.

Version 2.4

The parameter, l3-port, deprecated.

Version 2.4.1

The parameter, vlan-type, vnet, and public-vlan, added.

Version 2.5

The parameters, vnet and sriov-vf, added.

Version 2.5.4

The parameters, vrrp-id, vrrp primary, vrrp priority, and vrrp-adv-int added.

Version 2.6.2

The parameter, if-nat-realm, added.

Usage   A virtual network manager interface (VNET manager) can administer a virtual network (VNET) but the same management abstraction can also be used to administer a fabric, cluster, or standalone switch. This command removes a VNET manager interface.

Examples  To display information about all VNET manager interfaces, use the following command:

CLI network-admin@switch > vnet-manager-interface-show

See Also   

vnet-create

vnet-delete

vnet-modify

vnet-show

vnet-manager-interface-add

vnet-manager-interface-modify

vnet-manager-interface-remove

vnet-manager-migrate

vnet-manager-modify

vnet-manager-show

vnet-manager-service-modify

vnet-manager-service-show

vnet-port-add

vnet-port-remove

vnet-service-show