vnet-modify

This command is used to modify an existing VNET on the configuration on the switch.

Syntax   vnet-modify name name-string [vlans vlan-list]

name name-string

Specify the name of the VNET to modify.

vlans vlan-list

Specify the list of VLANs to modify.

managed-ports port-list

Specify the list of managed ports on the VNET.

num-private-vlans number

Specify the number of private VLANs that the VNET administrator can create for the VNET. This is a number between 1 and 4094.

public-vlans vlan-list

Specify the public VLANs assigned to the private VLAN VNET.

vxlans vxlan-id

Specify the VLXN ID assigned to the VNET.

vxlan-end vxlan-id

Specify the last VXLAN ID assigned to the VNET.

shared-ports port-list

Specify the shared ports for the VNET.

Defaults   None.

Access   CLI

History   .

Version 1.2

Command introduced.

Version 2.1

The parameter, vrg, is deprecated.

Version 2.4.1

The parameters, num-private-vlans, vxlans, and vxlan-end added.

Version 2.5

The parameter, public-vlans, added.

Usage   

A fabric, cluster, or standalone switch can be virtualized into tenant networks called virtual networks (VNETs). This command deletes a VNET.

Examples  

To modify a fabric-wide virtual network (VNET) named MyVMotionVNET, and modify the VLANs to the range,11-15, use the following command:

CLI network-admin@switch > vnet-modify name MyVMotionVNET vlans 11-15

See Also   

vnet-create

vnet-delete

vnet-show

vnet-manager-interface-add

vnet-manager-interface-modify

vnet-manager-interface-remove

vnet-manager-interface-show

vnet-manager-migrate

vnet-manager-modify

vnet-manager-show

vnet-manager-service-modify

vnet-manager-service-show

vnet-port-add

vnet-port-remove

vnet-service-show