vnet-service-traceroute

This command is used to traceroute from a VNET service.

Syntax   vnet-service-traceroute name name-string host-ip ip-address [resolve|no-resolve] [src-ip ip-address] [probe-type icmp-probe|udp-probe]

name name-string

Specifies the name of the VNET service.

host-ip ip-address

Specifies the IP address of the host.

Specify between 0 and 3 of the following options:   

resolve|no-resolve

Specifies to display IP addresses as host names in the output.

src-ip ip-address

Select an alternative source IP address.

probe-type icmp-probe|udp-probe

Specifies the type of probe for the traceroute.

Defaults   None.

Access   CLI

History   

Version 2.3.2

Command introduced.

Version 2.3.1

The parameters, resolve, src-ip, and probe-type added.

Usage   Use this command to traceroute services on the VNET.

Examples  To traceroute a service on the VNET, use the following syntax:

CLI network-admin@switch > vnet-service-traceroute

See Also   

vnet-create

vnet-delete

vnet-modify

vnet-show

vnet-manager-interface-add

vnet-manager-interface-modify

vnet-manager-interface-remove

vnet-manager-interface-show

vnet-manager-migrate

vnet-manager-modify

vnet-manager-show

vnet-manager-service-modify

vnet-manager-service-show

vnet-port-add

vnet-port-remove

vnet-manager-service-show