This command is used to display vPort statistics including the number of incoming and outgoing packets.

Syntax   vport-stats-show

time date/time: yyyy-mm-ddThh:mm:ss

Specifies a point in tjme for displaying historical information.

start-time date/time: yyyy-mm-ddThh:mm:ss

Specifies the start time for vPort history collection.

end-time date/time: yyyy-mm-ddThh:mm:ss

Specifies the end time for vPort history collection.

duration duration: #d#h#m#s

Specifies the duration to collect the vPort history.

interval duration: #d#h#m#s

Specifies the intervals to collect vPort history.


Specifies to display all of the vPort history since collection began on the fabric.

older-than duration: #d#h#m#s

Specifies to display vPort information older than a specific duration.

within-last duration: #d#h#m#s

Specifies to display vPort information with a specific duration.

switch-id node name

Specifies the switch ID for collecting vPort statistics.

hostname hostname-string

Specifies the host name statistics.

ip ip-address

Specifies IP address statistics.

mac mac-address

Specifies the MAC address assigned to the vPort.

vnet vnet name

Specifies VNET statistics.

vlan vlan-id

Specifies VLAN statistics. Range is 0..4095.

vxlan vxlan-id

Specifies VXLAN statistics. Range is 0..16777215.

entity entity-string

Specifies the VM or VM Kernel device name.

vnic-type untagged|tagged|trunked|vm-mgmt|vm-kernel|vMotion|vSAN|FTL|    rep|p-NFC|r-NFC|mgmt|unknown

Specifies the vNic attached to VM traffic type.

 vs-type none|host-vs|distributed-vs|unknow

Specifies the Virtual Switch type

ibytes ibytes-number

Specifies number of incoming bytes.

ipkts ipkts-number

Specifies number of incoming packets.

idiscards idiscards-number

Specifies number of incoming packets discarded.

ierrs ierrs-number

Specifies number of incoming packets with errors..

obytes obytes-number

Specifies number of outoing bytes.

opkts opkts-number

Specifies number of outoing packets.

odiscards odiscards-number

Specifies number of outgoing packets discarded.

oerrs oerrs-number

Specifies number of outgoing packets with errors.

count count-number

Specifies the statistics count.

Defaults   None

Access   CLI

History   .

Version 2.3

Command introduced.

Version 2.4.1

The parameter, count, added.

Version 2.5.4

The parameters, entity, vnic-type, and vs-type added.

Usage   Use this command to display vPort statistics.

Examples  To generate a report, use the following syntax:

CLI network-admin@switch > vport-stats-show