vrouter-bgp-neighbor-show

This command displays information about Border Gateway Protocol (BGP) neighbors.

Syntax   vrouter-bgp-neighbor-show

vrouter-name name-string

Specifies the name of the vRouter.

Specifies the following BGP neighbor arguments:

neighbor ip-address

Specifies the IP address of the neighbor.

ver ver-number 

Specifies the BGP version.

remote-as remote-as-number

Specifies the AS number of the remote connection.

msg_rcvd msg_rcvd-number

Specifies the number of messages received from the receive socket buffer.

msg_sent msg_sent-number

Specifies the number of messages written to the transmit socket buffer.

tblver tblver-number

Specifies the version of the routing table.

inQ inQ-number

Specifies the number of BGP packets queued for a neighbor.

outQ outQnumber

Specifies the number of BGP packets queued for transmission to a neighbor.

up/down up/down-string

Specifies if the neighbor is up or down.

state/pfxrcd state/pfxrcd-string

Specifies the current state of the BGP session. The state can be any of the following types:

1 — Idle

2 — Connect

3 — Active

4 — OpenSent

5 — OpenConfirm

6 — Established

remote-router remote-router-string

Specifies the neighbor router name.

multi-protocol ipv4-unicast|ipv6-unicast|

Specify a multi-protocol for BGP.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.0

Command introduced.

Version 2.4.1

The parameter, remote-router, added.

Usage   Use this command to display information about BGP neighbors configured on a vRouter.

Examples  To display all information about BGP neighbors, use the following command:

CLI network-admin@switch > vrouter-bgp-neighbor-show

vrouter-name: vrouter33       

neighbor:     10.9.100.200

ver:          4

remote-as:    100

msg_rcvd:     324

msg_sent:     330

tblver:       0

inQ:          0

outQ:         0

up/down:      00:31:25

state/pfxrcd: 1

vrouter-name: vrouter55

neighbor:     10.9.100.100

ver:          4

remote-as:    100

msg_rcvd:     325

msg_sent:     330

tblver:       0

inQ:          0

outQ:         0

up/down:      00:31:26

state/pfxrcd: 1