vrouter-bgp-remove

This command removes Border Gateway Protocol (BGP) from a virtual router (vRouter) service on a fabric, cluster, or standalone switch.

Syntax   vrouter-bgp-remove vrouter-name name-string ip ip-address 

vrouter-name name-string

Specify the name of the vRouter service.

Specify the following BGP arguments:

ip ip-address

Specify the IP address of the route to remove from the vRouter. This is either the neighbor IP address or network IP address.

Defaults   None.

Access   CLI

History   Command introduced in nvOS Version 1.2.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a vRouter service that forwards traffic between networks and implements Layer 4 protocols. Use this command to remove BGP to the vRouter service.

Examples  To remove the neighbor BGP route from the vRouter service, BGP-vService, use the following command:

CLI network-admin@switch > vrouter-bgp-remove vrouter-name BGP-vService name 209.75.183.3

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show