vrouter-fib-arps-show

This command is used to display information about Address Resolution Protocol (ARP) in the forwarding information database. Before using this command, the server-switch must be part of a fabric.

Syntax   vrouter-fib-arps-show vrid vrid-number ip ip-address if-id if-id-number port port-number vnet vnet-name vlan vlan-id mac mac-address egress-id egress-id-number flags ECMP|Trunk

vrid vrid-number

Displays the virtual router identifier.

ip ip-address

Displays the IP address.

if-id if-id-number

Displays the interface identifier.

port port-number

Displays the port number.

vnet vnet-name

Specifies the VNET of the router.

vlan vlan-id

Displays the VLAN identifier.

mac mac-address

Displays the MAC address.

egress-id egress-id-number

Displays the egress identifier.

flags ECMP|Trunk|route-to-if|local-subnet|hit|
KEEP-SMAC|KEEP-TTL

Displays hardware flags.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.2.5

Command introduced.

Version 2.4.1

The parameter, vnet, added.

Version 2.6.2

Additional options added to flags, KEEP-SMAC and KEEP-TTL.

Usage   Use this command to display ARP information in the forwarding information database.

Examples  To display ARP information, use the following syntax:

CLI network-admin@switch > vrouter-fib-arps-show format all layout vertical

switch:    aquila22-m

ip:        10.16.113.1

if-id:     0

vlan:      113

mac:       66:0e:94:9f:30:aa

flags:     

switch:    aquila22-m

ip:        10.16.113.2

if-id:     0

vlan:      113

mac:       66:0e:94:f8:74:66

flags:     

switch:    aquila22-m

ip:        10.16.115.1

if-id:     1

vlan:      115

mac:       66:0e:94:f8:74:66

flags: