vrouter-fib-routes-show

This command displays information about routes in the forwarding information database.

Syntax   vrouter-fib-routes-show vrid vrid-number ip ip-address prelen prelen-number nexthop ip-address if-ip ip-address intf-id intf-id-number vnet vnet-name vlan vlan-id port port-number nexthop-mac mac-address flags ECMP|Trunk egress-id egress-id-number ecmp-group ecmp-group-number state up|admin-down|if-admin-down|
if-vlan-down|nexthop-up|nexthop-down

vrid vrid-number

Display the virtual router identifier.

ip ip-address

Display the IP address of the route.

prelen prelen-number

Display the prefix length.

nexthop ip-address

Display the IP address for the next hop in the network.

if-ip ip-address

Displays the IP address of the interface.

intf-id intf-id-number

Displays the interface identifier.

vnet vnet-name

Specifies the VNET of the router.

vlan vlan-id

Displays the VLAN identifier.

port port-number

Displays the port number.

nexthop-mac mac-address

Displays the MAC address of the next hop on the network.

flags ECMP|Trunk|route-to-if|local-subnet|hit|
KEEP-SMAC|KEEP-TTL

Displays hardware router flags.

egress-id egress-id-number

Displays the egress identifier.

ecmp-group ecmp-group-number

Displays the ECMP group.

state up|admin-down|
if-admin-down|
if-vlan-down|
nexthop-up|

nexthop-down

Displays the route state.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.2.5

Command introduced.

Version 2.4.1

The parameter, vnet, added.

Version 2.6.2

Additional options added to flags, KEEP-SMAC and KEEP-TTL.

Usage   Use this command to display routes in the forwarding information database.

Examples  To display routes in the forwarding information database, use the following syntax:

CLI network-admin@switch > vrouter-fib-routes-show format all layout vertical

switch:      pleiades-24

vrid:        0

ip:          10.17.123.1

prelen:      32

nexthop:     10.17.123.1

if-ip:       10.17.123.2

vlan:        123

port:        0

flags:       

ecmp-group:  -1

state:       up

switch:      pleiades-24

vrid:        0

ip:          10.17.125.1

prelen:      32

nexthop:     10.17.125.1

if-ip:       10.17.125.1

vlan:        125

port:        0

flags:       

ecmp-group:  -1

state:       up

 

See Also   

vrouter-fib-arps-show