vrouter-igmp-static-join-remove

This command adds Internet Group Management Protocol (IGMP) to a virtual router (vRouter) service on a fabric, cluster, or standalone switch..


 

Informational Note:  IGMPv1 is not supported in Netvisor or ONVL. If you are using IGMPv1, you must disable IGMP snooping on the Pluribus Networks switch.

Syntax   vrouter-igmp-static-join-remove vrouter-name name-string name name-string 

vrouter-name name-string

Specify the name of the vRouter service.

Specify the following IBMP static join arguments:

name name-string

Specify the name of the IGMP configuration.

Defaults   None.

Access   CLI

History   Command introduced in nvOS Version 1.2.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a vRouter service that forwards traffic between networks and implements IPv4 protocols.

Examples  To remove the IGMP-vRouter configuration from the vRouter service, MyvService, use the following command:

CLI network-admin@switch > vrouter-igmp-static-join-remove vrouter-name MyvService name IGMP-vRouter

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show