vrouter-ospf-add

This command adds Open Shortest Path First (OSPF) routing protocol to a virtual router (vRouter) service for a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-ospf-add vrouter-name name-string network ip-address netmask netmask ospf-area ospf-area-number

vrouter-name name-string

Specify the name of the vRouter.

Specify the following OSPF arguments:

network ip-address

Specify the network IP address.

netmask netmask

Specify the netmask of the IP address.

ospf-area ospf-area-number

Specify the OSPF area number in dotted decimal format.

Defaults   None.

Access   CLI.

History   

Version 1.2

Command introduced.

Version 2.1

The parameters, stub-area and stub-type, added.

Version 2.2.3

The parameters, stub-area and stub-type, moved to the command vrouter-ospf-area.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command adds OSPF for an existing Router service.

Examples  To add OSPF to vRouter, MyvService, with the IP address of 192.168.11.3, netmask 32, and OSPF area 1.0.0.0, use the following command:

CLI network-admin@switch > vrouter-ospf-add vrouter-name MyvService network 192.168.11.3/32 ospf-area 1.0.0.0

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show