vrouter-ospf-interface-show

This command is used to display specific OSPF configuration information

Syntax   vrouter-ospf-interface-show

i

vrouter-name name-string

Displays the name of the vRouter.

Specify any of the following optional OSPF parameters:

nic vrouter interface nic

Displays the name of the vNIC.

nic-state down|up

Displays the vNIC state.

l3-port l3-port-number

Displays the Layer 3 port numbers.

ip ip-address

Displays the IP address of the interface.

netmask netmask

Displays the netmask of the IP address.

broadcast ip-address

Displays the broadcast IP address.

area ip-address

Displays the area ID for the interface in IPv4 format.

mtu mtu-number

Displays MTU for the interface.

mtu-mismatch-detection|
no-mtu-mismatch-detection

Displays if MTU mismatch detection is configured.

router-id ip-address

Displays the router ID as an IP address.

network-type point-to-point|broadcast|loopback

Displays the OSPF network type.

state down|loopback|waiting|point-to-point|dr-other|backup|dr

Displays OSPF interface state.

dr-id ip-address

Displays the designated router ID.

dr-ip ip-address

Displays the designated router IP address.

bdr-id ip-address

Displays the backup designated router ID.

bdr-ip ip-address

Displays the designated router IP address.

priority priority-number

Displays the priority.

cost cost-number

Displays the cost.

hello hello-number(s)

Displays the hello-interval in seconds.

dead dead-number(s)

Displays the dead time in seconds.

retransmit retransmit-number(s)

Displays the retransmit interval time in seconds.

hello-due hello-due-string

Displays the hello due in.

neighbor neighbor-number

Displays the neighbor count.

adjacent adjacent-number

Displays the adjacent number count.

 

 

 

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0.

Usage   Use this command to display statistics about a NAT configuration.

Examples  To display information about an OSPF interface, use the following syntax:

CLI network-admin@switch > vrouter-ospf-interface-show

 

See Also