vrouter-ospf-remove

This command is used to remove an OSPF configuration from a vRouter service on a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-ospf-remove vrouter-name name-string network ip-address

vrouter-name name-string

Specify the name of the vRouter service.

Specify the following OSPF arguments:

network ip-address

Specify the IP address of the OSPF configuration.

Defaults   None

Access   CLI

History   Command introduced in nvOS Version 1.2.1.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command removes OSPF for an existing Router service.

Examples  To remove ospf-route from the vRouter, MyvService, use the following command:

CLI network-admin@switch > vrouter-ospf-remove vrouter-name MyvService name ospf-route

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show