vrouter-rip-routes-show

This command displays RIP routes currently installed on vRouter services on a fabric, cluster, virtual network (VNET), or standalone switch.

Syntax   vrouter-rip-routes-show vrouter-name name-string network ip-address netmask netmask [next-hop ip-address] [metric metric-number] [source ip-address] [tag tag-number] [type rip|connected|static|ospf|bgp|missing|kernel-route|igmp|babel| pim] [attribute normal|static|default|redistribute|interface]

vrouter-name name-string

Specifies the name of the vRouter service.

network ip-address

Specifies the IP address.

netmask netmask

Specifies the netmask of the IP address.

next-hop ip-address

Specifies the next hop IP address.

metric metric-number

Specifies the metric assigned to the route.

source ip-address

Specifies the source IP address.

tag tag-numbers

Specifies the tag number.

type rip|connected|static|ospf|
bgp|missing|kernel-route|
igmp|babel|pim|ospf6

Specifies the type of connection.

attribute normal|static|default|
redistribute|interface

Specifies the attribute for the connection.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI.

History   Command introduced in Version 2.2.

Usage   This command displays information about RIP routes installed on the vRouter.

Examples  To display RIP information on all vRouter services, use the following command:

CLI network-admin@switch > vrouter-rip-show layout vertical

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show