vrouter-route-map-modify

This command is used to modify route maps for BGP and OSPF vRouter configurations.

Syntax   vrouter-route-map-modify

vrouter-name name-string

Specify the name of the vRouter.

name name-string

Specify the name of the route map.

seq number

Specify the sequence number to assign to the route map. This is a value between 1 and 4294967295.

action permit|deny

Specify the route map to permit or deny packets.

match-prefix prefix-list-name

Specify the prefixes used to match.

match-community match-community-string

Specify the community string to match. (BGP only)

exact-match|no-exact-match

Specify if the community string is an exact match or not. (BGP only)

community-attribute unset|none|no-export|no-advertise|
internet|local-AS

Specify the community attribute. If you specify a community attribute, you cannot add a generic community attribute as well.

community-attribute-generic community-attribute-generic-string

Specify a generic community attribute such as AA:NN. (BGP only)

additive|no-additive

Specify if a given community is appended to existing communities value.

comm-list-del vrouter community-list name 

Specify if you want to remove community values from BGP community attributes

local-pref integer

Specify a local preference. This is a value between 1 and 4294967295.

metric none

Specify a metric for the route map.

metric-type 1|2

Specify the metric type as 1 or 2.

as-path-prepend integer

Specify an integer from 1 to 4294967295.

as-path-prepend-last-as integer

Specify an integer from 1 to 10.

as-path-exclude integer

Specify an integer from 1 to 4294967295.

Defaults   None

Access   CLI - Network Admin

History   

Version 2.4.0

Command introduced.

Version 2.6.0

The parameters, metric and metric-type, added for OSPF. The parameters, as-path-*, added.

Version 3.0.0

The parameters for BGP communities added.

Usage   Use this command to modify route maps for BGP or OSPF configurations to ensure that prefixes are installed into the route table.

Examples  To modify a route map on vRouter1, with the name bgp-map, and change the local preference to 27, use the following syntax:

CLI network-admin@switch > vrouter-route-map-modify vrouter-name vRouter1 name bgp-map local-pref 27