vrouter-routes-multicast-show

This command allows you to display information about multicast routes on a vRouter configured on the switch.

Syntax   vrouter-routes-multicast-show g

vrouter-name name-string

Specifies the vRouter name.

source ip-address

Specifies the source IP address.

group ip-address

Specifies the IP address of the group.

proto rip|connected|static|ospf|bgp|missing|
kernel-route|igmp|
babel|pim|ospf6

Specifies the protocol used by the routes.

input input-string

Specifies the input interface for incoming routes.

iVifI iVifI-number

Specifies the input index for on a virtual interface (VNIC).

output output-string

Specifies the output interface for an outgoing routes.

oVifI oVifI-number

Specifies the output index for a virtual interface (VNIC).

ttl ttl-number

Specifies the time-to-live (TTL) value.

uptime uptime-string

Specifies the uptime for the route.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in nvOS Version 1.2.1

Usage   You can display information about the multicast routes on a vRouter.

Examples  To display multicast route information, use the following command:

vrouter-routes-multicast-show layout vertical

vrouter-name:              vr1

source:                    10.13.25.200

group:                     232.1.1.1

proto:                     vr1.eth0

iVifI:                     2

output:                    vr1.eth1

oVifI:                     3

ttl:                       1

uptime:                    00:00:01