vrouter-show

This command displays a virtual router (vRouter) service for a fabric, cluster, or standalone switch.

Syntax   vrouter-show

id

The ID number assigned to the configuration.

name name-string

Specifies the name of the vRouter.

type vnet-mgr|vrouter|vlb|
dhcp|dns|netzone| ofpd|orphaned|netvm|

nat|openstack|netvmm

Specifies the type of vRouter.

scope local|fabric

Specifies the scope of the vRouter.

vnet vnet-name

Specifies the name of the VNET.

location fabric-node-name

Specifies the location of the vRouter on the fabric.

router-type hardware|software

Specifies the router type as hardware or software.

hw-router-mac mac-address

Specifies the MAC address of the hardware router.

hw-vrid hw-vrid-number

Specifies the virtual router ID of the hardware router.

hw-vrrp-id hw-vrrp-id-number

Specifies the VRRP ID for a hardware router.

bgp-as bgp-as-number

Specifies the Autonomous System Number (ASN) if the vRouter runs Border Gateway Protocol (BGP).

router-id ip-address

Specifies the vRouter IP address

proto-multi none|vmrp|pim-ssm

Specifies the optional multicast protocol for the vRouter service. Select none, Vector Multicast Routing Protocol (VMRP), or Protocol Independent Multicast-source specific mode (PIM-SIM).

bgp-redistribute static|connected|rip|ospf

Specify how BGP routes are redistributed.

bgp-redist-static-metric none

Specify a static metric for BGP route redistribution.

bgp-redist-connected-metric none

Specify a connected metric for BGP route redistribution

bgp-redist-rip-metric none

Specify a RIP metric for BGP route redistribution.

bgp-redist-ospf-metric none

Specify a OSPF metric for BGP route redistribution.

bgp-cluster-id ip-address

Specify an IP address for a BGP cluster.

bgp-max-paths bgp-max-paths-number

Specify the maximum number of paths for BGP.

bgp-ibgp-multipath bgp-ibgp-multipath-number

Specify the number of multipaths for BGP.

bgp-bestpath-as-path none|ignore

Specify a parameter for a best path as path.

bgp-dampening|
no-bgp-dampening

Specify a BGP damp

bgp-graceful-restart|
no-bgp-graceful-restart

Specify a graceful restart for BGP routing.

bgp-stalepath-time second

Specify the length of time befor a BGP path becomes stale. This is a value between 0 and 3600.

bgp-scantime seconds

Specify a BGP scanner interval in seconds. The default interval is 60 seconds with a range of 5 to 60 seconds.

bgp-keepalive-interval seconds

Specify a BGP keepalive interval in seconds. The default is 60 seconds with a range of 0 to 65535 seconds.

bgp-holdtime seconds

Specify a BGP holdtime in seconds. The default is 180 seconds with a range of 0 to 65535 seconds.

bgp-distance-external integer

Specify the BGP distance for routes external to the AS.

bgp-distance-internal integer

Specify the BGP distance for routes internal to the AS.

bgp-distance-local integer

Specify the BGP distance for routes local to the AS.

bgp-ipv4-unicast|
no-bgp-ipv4-unicast

Specify a MP-BGP Control default IPv4 Unicast AFI/SAFI.

rip-redistribute static|connected|ospf|
bgp

Specify how RIP routes are redistributed.

ospf-redistribute static|connected|rip|
bgp

Specify how OSPF routes are redistributed.

vrrp-track-port port-list

Specify a port to track a VRRP configuration.

ospf-redist-static-
metric-type 1|2

Specify a static metric type for OSPF route redistribution.

ospf-distance-external integer

Specify the OSPF distance for routes external to the AS.

ospf-distance-internal integer

Specify the OSPF distance for routes internal to the AS.

ospf-distance-local integer

Specify the OSPF distance for routes local to the AS.

ospf-stub-router-on-startup|
no-ospf-stub-router-on-startup

Specify if you want advertise self as stub router temporarily on startup.

ospf-stub-router-on-startup-period integer

Specify the time period to advertise self as stub router on startup. This s a value between 5 and 86400 seconds.

ospf-bfd-all-if|
no-ospf-bfd-all-if

Specify if you want to use BFD protocol for fault detection on all OSPF interfaces.

ospf-default-information none|originate|always

Specify if you want to control origination of default route.

ospf-default-info-originate-
metric none

Specify the metric for OSPF origination of default route.

ospf-default-info-originate-metric-type 1|2

Specify the metric type for OSPF origination of default route.

ospf-redist-connected-
metric none

Specify a connected metric type for OSPF route redistribution.

ospf-redist-connected-
metric-
type 1|2

Specify a connected metric type for OSPF route redistribution.

ospf-redist-rip-metric none

Specify a RIP metric type for OSPF route redistribution.

ospf-redist-rip-metric-type 1|2

Specify a RIP metric type for OSPF route redistribution.

ospf-redist-bgp-metric none

Specify a BGP metric type for OSPF route redistribution.

ospf-redist-bgp-metric-type 1|2

Specify a BGP metric type for OSPF route redistribution.

ospf6-redistribute static|connected|bgp4

Specify if you want to redistribute OSPF6 routes.

ospf6-redist-static-metric none

Specify a metric for OSPF6 redistribute of static routes.

ospf6-redist-static-metric-
type 1|2

Specify a metric type for OSPF6 redistribution of static routes.

ospf6-redist-connected-metric none

Specify a metric for OSPF6 redistribution of connected routes.

ospf6-redist-connected-metric-type 1|2

Specify a metric type for OSPF6 redistribution.

ospf-default-information none|originate|always

Specify how to control the origination of default route.

ospf-default-info-originate-metric none

Specify the metric for OSPF origination of default route.

ospf-default-info-originate-metric-
type 1|2

Specify the metric type for OSPF origination of default route.

ospf-default-info-originate-route-
map vrouter route-map name   

Specify the route map for OSPF origination of default route.

bgp-snmp|no-bgp-snmp

Enable or disable BGP SNMP MIB.

bgp-snmp-notification|no-bgp-snmp-notification

Enable or disable SNMP notifications for BGP MIBs.

ospf-snmp|no-ospf-snmp

Enable or disable OSPF SNMP MIB.

ospf-snmp-notification|no-ospf-snmp-notification

Enable or disable SNMP notifications for OSPF MIBs.

ospf6-snmp|no-ospf6-snmp

Enable or disable OSPFv3 SNMP MIB.

ospf6-snmp-notification|no-bgp-snmp-notification

Enable or disable SNMP notifications for OSPFv3 MIBs.

ip-snmp|no-ip-snmp

Enable or disable ipForward SNMP MIBs.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.0

Parameter type added.

Version 2.2

The parameter, location, hw-router-mac, and hw-vrrp-id, added. The parameters, bgp-redistribute, rip-redistribute, and ospf-redistribute, added.

Version 2.2.3

The parameters bgp-redist and ospf-dist added. The parameter vrrp-track-port added. The parameters bgp-cluster, bgp-max-paths, bgp-multipath, bgp-best-path, bgp-dampening, bgp-graceful-restart, and bgp-stalepath-time added

Version 2.3.1

The parameters, ospf6-, added.

Version 2.4

The parameters, ospf-stub-router-on-startup and vrrp-track-port added. The parameters bgp-scantime, bgp-keepalive-interval, and bgp-holdtime added.

Version 2.4.1

The parameter, bgp-distance-, and ospf-distance-, added.

Version 2.5.4

The parameter, shared-vnet-mgr, added.

Version 2.6

SNMP MIBs for BGP, OSPF, OSPFv3, and ipForward added.

Version 3.0.0

The parameters, ospf-bfd-all-if, ospf-default-information, ospf-default-info-originate, and ospf-default-info-originate-metric-type added.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays vRouter service.

Examples  To display all vRouter services, use the following command:

CLI (network-admin@techpubs-aquila1) > vrouter-show format all layout vertical

id:                 a0000dd:7

name:               vrrp-rtr1

type:               vrouter

scope:              fabric

vnet:               vrrp-router

vnet-service:       shared

state:              enabled

location:           techpubs-aquila1

storage-pool:       rpool

template:           no

router-type:        software

proto-multi:        none

id:                 6000021:c

name:               vrrp-rfr2

type:               vrouter

scope:              fabric

vnet:               vrrp-router

vnet-service:       dedicated

state:              enabled

location:           techpubs-aquila2

storage-pool:       rpool

template:           no

router-type:        software

proto-multi:        none

 

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-add

vrouter-static-route-remove

vrouter-static-route-show