vrouter-static-route-show

This command displays static route entries for an existing virtual router (vRouter) service for a fabric, cluster, standalone switch, or virtual network (VNET).

Syntax   vrouter-static-route-show

vrouter-name name-string

Specifies the name of the vRouter service.

network ip-address

Specifies the IP subnet of the network that you want to add a static router.

netmask netmask

Specifies the netmask of the IP subnet.

gateway-ip ip-address

Specifies the IP address of the gateway that you want to route packets destined for the network IP address.

bfd-dst-ip ip-address

Specifies the destination IP address for BFD monitoring.

distance number

Specifies the administrative distance in a number from 0 to 255.

0  — Connected interface

1 — Static route

110 — OSPF

120 — RIP

200 — Internal BGP

bfd none|single-hop|multi-hop

Specifies the BFD protocol for the gateway fault detection.

bfd-src-ip ip-address

Specifies the source IP address for the BFD session.

interface vrouter interface nic

Specify the vRouter interface for the static route.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.1

The parameter, distance, added.

Version 2.6.2

The parameters, bfd-dst-ip, bfd, bfd-src-ip, added.

Version 3.0.0

The parameter, interface, added.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays static route entries for an existing Router service.

Examples  To display all static routes for all vRouter services, use the following command:

CLI network-admin@switch > vrouter-static-route-show layout vertical

See Also   

vrouter-create

vrouter-delete

vrouter-migrate

vrouter-modify

vrouter-show

vrouter-bgp-add

vrouter-bgp-remove

vrouter-bgp-show

vrouter-igmp-static-join-add

vrouter-igmp-static-join-remove

vrouter-igmp-static-join-show

vrouter-interface-add

vrouter-interface-modify

vrouter-interface-remove

vrouter-interface-show

vrouter-ospf-add

vrouter-ospf-remove

vrouter-ospf-show

vrouter-ospf-neighbor-show

vrouter-rip-add

vrouter-rip-remove

vrouter-rip-show

vrouter-static-route-remove