Viewing Quagga Logs   

Quagga logs files, such as Zebra, OSPF, OSPF6, BGP, BFD and RIP can be viewed directly from the console using the Netvisor OS CLI. Because Quagga log files accumulate on the switch, you may want to clear a particular log file so they do not create space issues.

New Commands

Use this command to view Quagga logs files directly from your console:

CLI network-admin@Leaf1 > vrouter-log-show vrouter-name vrouter-name protocol 

vrouter-log-show

Displays vrouter protocol logs

one or more of the following options:

vrouter-name vrouter-name

Specify name of the vRouter.

protocol zebra|ospf|ospf6|bgp|bfd|rip

Specify the name of the protocol files to view.

 

 

Use this command to clear Quagga files from a specific protocol log file:

CLI network-admin@Leaf1 > vrouter-log-clear 

vrouter-log-clear

Clears vrouter protocol logs from a protocol log file

one or more of the following options:

vrouter-name vrouter name

Specify the name of the vRouter service.

 protocol zebra|ospf|ospf6|bgp|bfd|rip

Specify the name of the log file to clear.