client-server-stats-show

This command is used to show statistics generated between a client and server on the network.

Syntax   client-server-stats-show

timestamp date/time:
yyyy-mm-ddThh:mm:ss

Clear statistics from a specific timestamp period.

start-time date/time:
yyyy-mm-ddThh:mm:ss

Clear statistics from a specific start time and date.

end-time date/time:
yyyy-mm-ddThh:mm:ss

Clear statistic from a specific end time and date.

duration: #d#h#m#s

Clear statistics for a specific duration.

interval duration: #d#h#m#s

Clear statistics for a specific interval duration.

since-start

Clear statistics from the start of collection.

older-than duration: #d#h#m#s

Clear statistics older than a specified date and time.

within-last duration: #d#h#m#s

Clear statistics within a specified duration time.

count count-number

Specifies the number of counters.

vlan vlan-id

Specifies statistics for a specific VLAN.

vxlan vxlan-id

Specifies statistics for a specific VXLAN.

client-switch-port port-number

Specifies statistics for a specific port number on the client switch.

server-switch-port port-number

Specifies statistics for a specific port number on the server switch.

client-mac mac-address

Specifies statistics for a specific client MAC address.

server-mac mac-address

Specifies statistics for a specific server MAC address.

client-ip ip-address

Specifies statistics for a specific client IP address.

server-ip ip-address

Specifies statistics for a specific client IP address.

server-port

Specifies the type of protocol on the server port. This includes HDFS, Hive, Ganglia, Cassandra, Nutanix and other server types.

syn syn-number 

Specifies the number of SYN packets.

est est-number

Specifies the number established connections.

fin fin-number

Specifies the total number of closed connections statistics.

syn-resends syn-resends-number 

Specifies the number of SYN packet resends.

syn-ack-resends syn-ack-resends-number

Specifies the number of SYN-ACK packet resends.

obytes obytes-number

Specifis the number of outgoing bytes to clear statistics.

ibytes ibytes-number

Specifies the number of incoming bytes to clear statistics.

total-bytes total-bytes-number

Specifies the total bytes to clear statistics.

avg-dur high resolution time: #ns

Specifies the average duration of high resolution statistics.

avg-lat high resolution time: #ns

Specifies the average latency statistics.

first-seen date/time: yyyy-mm-ddThh:mm:ss

Specifies the first-seen statistics only.

last-seen date/time: yyyy-mm-ddThh:mm

Specifies the last-seen statistics only.

last-seen-ago duration: #d#h#m#s

Specifies a duration to clear statistics.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.4.1

The parameters, syn-resends, and syn-ack-resends, added.

Usage   You can display all statistics for a client server connection or you can use a filter to display specific statistics.

Examples  To display all statistics on switch pleiedes24, use the following command:

CLI network-admin@switch > client-server-stats-show layout vertical

switch:              pleiades24

vlan:                1

vxlan:               0

client-ip:            192.171.1.65

server-ip:            192.171.2.60

server-port:          ssh

syn:                  4

est:                  0

fin:                  724

obytes:               1.29M

ibytes:               2.70M

total-bytes:          3.99M

avg-dur:              486ms

avg-lat:              97.1us

last-seen-ago:        51m4s

switch:              pleiedes24

vlan:                1

vxlan:               0

client-ip:            192.171.1.31

server-ip:            192.171.2.60

server-port:          ssh

syn:                  10

est:                  0

fin:                  1.60K

obytes:               2.92M

ibytes:               6.09M

total-bytes:          9.01M

avg-dur:              490ms

avg-lat:              86.3us

last-seen-ago:        51m4s

See Also   

client-server-stats-clear-history

client-server-stats-clear