This command is used to modify a local fabric on the network.

Syntax   fabric-local-modify vlan vlan-id [fabric-network in-band|mgmt][control-network in-band|mgmt] [fabric-advertisement-network inband-mgmt|inband-only]

vlan vlan-id

Specify the VLAN to modify on the local fabric.

control-network in-band|mgmt

Specify the in-band interface or the management interface to send fabric communications over the control plane.

fabric-network in-band|mgmt

Specify the in-band interface or the management interface for fabric administrative network.

fabric-advertisement-network inband-mgmt|inband-only

Specify if you want to send fabric advertisement packets over the inband management interface or inband only.

Defaults   The default VLAN for a fabric is VLAN 0.

Access   CLI

History   .

Version 2.2

Command introduced.

Version 2.2.4

The parameter, network-type, introduced.

Version 2.4

The parameter, network-type, removed. Two parameters, fabric-network and control-network added. The parameter, repeer-to-cluster-node, added.

Version 2.4.1

The parameter, fabric-advertisement-network, added.

Usage   In some network configurations, you may want to assign a different VLAN to a local fabric.

Examples  To modify a local fabric and assign it to VLAN 2, use the following syntax:

CLI network-admin@switch > fabric-local-modify vlan 2

See Also