fabric-node-show

This command is used to display information about a node from a fabric.

Syntax   fabric-node-show

name fabric-node-name

Specifies the name of the fabric node to display information.

id id-string

Specifies the identifier for the fabric node

serial serial-string

Specifies the serial string for the fabric node

fab-name fab-name

Specifies the name of the fabric node

fab-id

Specifies the fabric identifier

cluster-id

Specifies the cluster identifier

fabric-network in-band|mgmt

Specifies the fabric network type.

control-network in-band|mgmt

Specifies the interface to send control plane communications.

local-mac mac-address

Specifies the local MAC address of the fabric

mgmt-ip ip-address

Specifies the IP address for the management NIC

mgmt-netmask netmask]

The netmask for the IP address

mgmt-mac mac-address

Specifies the MAC address for the management interface.

mgmt-vnet vnet-name

Specifies the management VNET.

mgmt-public-vlan vlan-id 

Specifies the public VLAN ID.

mgmt-secondary-mac mac-address

Specifies the secondary MAC address of the management interface

in-band-ip ip-address

Specifies the IP address for the in-band interface to the switch control plane.

in-band-netmask netmask

Specifies the netmask for the in-band interface to the switch control plane.

in-band-mac mac-address

Specifies the MAC address for the in-band interface to the switch control plane.

in-band-vnet vnet-name

Specifies the inband VNET name.

in-band-vlan vlan-id

Specifies the inband VLAN ID.

in-band-vlan-type public|private

Specifies the type of inband VLAN as public or private.

in-band-public-vlan vlan-id

Specifies the inband public VLAN ID.

in-band-secondary-mac mac-address

Specifies the secondary MAC address of the in-band interface

fab-tid fab-tid-number

Specifies the fabric identifier.

cluster-tid cluster-tid-number]

Specifies the cluster identifier.

out-port out-port-number

Specifies the port number where the switch multicasts the fabric discovery messages to other Pluribus Networks switch.

version version-string

Specifies the current ONVL version.

state offline|online|inband-only-
online|mgmt-only-online|
fabric_joined|setup-required|
eula-required|fabric-required| fresh-install]

Specifies the state of the fabric.

firmware_upgrade

not-required|required|reboot-required

Specifies if a firmware upgrade is required.

device-state

ok|error|simulator

Specifies the state of the switch.

ports ports-number

Specifies the port list used by the fabric.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in nvOS Version 1.2.1.

Version 1.2

Command introduced.

Version 2.3.2

The parameters, cluster-id, cluster-tid, mgmt-assignment, mgmt-vm-nic-type, mgmt-nic, mgmt-vxlan, mgmt-if, mgmt-alias-on, mgmt-vm-nic-type, mgmt-exclusive, mgmt-nic-enable, mgmt-nic-state, and corresponding in-band parameters deprecated.

Version 2.4.1

The parameters, mgmt-vnet, mgmt-public-vlan, in-band-vnet, in-band-vlan-type, and in-band-public-vlan added.

Usage   The fabric consists of one or more switches that share an administrative domain. The fabric presents the abstraction of a big logical switch with a single point of management, hiding the complexity of the underlying collection of switch hardware and inter-switch links. Use this command to display node information.

Examples  To display a list of fabrics visible from the local switch, use the following command:

CLI network-admin@switch > fabric-node-show layout vertical

id:                     167772208

name:                   pubdev01

fab-name:               info-dev

fab-id:                 a000030:5537b46c

cluster-id:             a000030:1

fab-mcast-ip:           ::

local-mac:              64:0e:94:28:00:8e

fabric-network:         in-band

mgmt-ip:                10.9.100.100/16

mgmt-mac:               64:0e:94:28:00:8f

mgmt-l3-port:           0

mgmt-secondary-macs:    

in-band-ip:             192.168.42.10/24

in-band-mac:            64:0e:94:28:00:8e

in-band-l3-port:        0

in-band-secondary-macs:

fab-tid:                8

cluster-tid:            1

out-port:               0

version:                2.2.202046923,pn-ONVL-2.2.4-2020412306

state:                  online

firmware-upgrade:       not-required

device-state:           ok

ports:                  0

See Also   

fabric-create

fabric-info

fabric-join

fabric-unjoin

fabric-node-evict

fabric-stats-show