hog-violator-show

The CPU Control Packet Processing Protection feature allows the CPU control packet processing path be protected against misbehaving and malicious hosts or end-points that may flood control protocol packets. This is also called “CPU hog protection”.

Netvisor provides three types of Control Plane Protection:

Syntax   hog-violator-show

i

mac mac-address

Displays the hog violator MAC address.

vlan vlan-id

Displays the hog violator VLAN ID.

vxlan vxlan-id

Displays the hog violator VXLAN ID.

port port-number

Displays the hog violator ingress port.

cpu-class cpu-class-string

Displays the hog violator original class.

hog-cpu-class hog-cpu-class-string

Displays the hog violator hog queue CPU class.

created date/time: yyyy-mm-ddTHH:mm:ss

Displays the time and date when hog violator is created.

vflow vflow-string

Displays the redirect vFlow.

vflow2 vflow-string

Displays the redirect vFlow 2.

vflow3 vflow-string

Displays the redirect vFlow 3.

idle-count idle-count-number

Displays the current idle count.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   Network Administrator

History   

Version 2.6.0.

Command introduced.

Version 3.0.0

The parameter, idle-count, added.

Usage   Use this command to display information about CPU hog violators.

Examples  To display information about CPU hog violators, use the following syntax:

CLI network-admin@switch > hog-violator-show

mac               vlan vxlan  port cpu-class hog-cpu-class created

----------------- ---- ------ ---- --------- ------------- --------

66:0e:94:10:d8:4a 704         15   ospf      hog-ospf      13:13:58

66:0e:94:10:d8:4a 704         15   bfd       hog-bfd       13:14:02

06:c0:00:17:30:0f 16          15   lldp      hog-lldp      13:14:07

06:c0:00:17:30:0f 16          15   lacp      hog-lacp      13:14:10

66:0e:94:1d:09:58      101001 25   arp       hog-arp       13:14:19

00:00:5e:00:01:0b 2001        128  vrrp      hog-vrrp      13:14:22

06:c0:00:17:30:0e 16          15   stp       hog-stp       13:14:31

80:ac:ac:f0:aa:34 16          15   bgp       hog-bgp       13:14:35

00:00:33:33:33:33 2003        15   arp       hog-arp       13:14:46

See Also   Command See Also