Inline Service

inline-service-create

The Inline Service feature manages service chains for Layer 1 Virtual Wire switches. The term, Inline Services, refers to services attached to a Layer 1 Virtual Wire switch such as Next-Generation Firewall (NGFW), Intrusion Detection System (IDS), Intrusion Prevention System (IPS), and Distributed Denial of Service attack (DDoS) Prevention.

When an Inline Service fails, a policy determines if traffic is allowed to bypass the Inline Services or if the traffic is blocked until the Inline Services recovers.

This command creates an Inline Service configuration.

Syntax   inline-service-create

i

name name-string

Specify a name for the Inline Service.

tx-port port-list

Specify the ports to send the Inline Service.

rx-port port-list

Specify the ports to receive the Inline Service.

heartbeat service-heartbeat name | none

Specify the service heartbeat.

Defaults   None

Access   Network Administrator

History   .

Version 2.6.0

Command introduced.

Version 3.0.0

The parameter, heartbeat service-heartbeat, added.

Usage   Use this command to create an Inline Service configuration.

Examples  To create an Inline Service configuration for IDS on transmit port 1 and receive port 2, use the following syntax:

CLI network-admin@switch > inline-service-create name IDS tx-port 1 rx-port 2

See Also