ipv6security-raguard-vlan-add

The IPv6 RA Guard feature provides support for allowing the network administrator to block or reject unwanted or rogue RA guard messages that arrive at the network device platform.

Syntax   ipv6security-raguard-vlan-add

i

name name-string

Specify the name of the RA Guard policy to add VLANs.

vlans vlan-id

Specify the VLANs to add to the policy.

Syntax

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0

Usage   Use this command to add a VLAN to an RA Guard policy.

Examples  To add VLAN 33 to RA Policy, RA-Guard, use the following syntax:

CLI network-admin@switch > ipv6security-raguard-vlan-add name RA-Guard vlans 33

ipv6security-raguard-vlan-remove

The IPv6 RA Guard feature provides support for allowing the network administrator to block or reject unwanted or rogue RA guard messages that arrive at the network device platform

Syntax   ipv6security-raguard-vlan-remove

i

name name-string

Specify the name of the RA Guard policy to add VLANs.

vlans vlan-id

Specify the VLANs to add to the policy.

Syntax

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0

Usage   Use this command to remove a VLAN from an RA Guard policy.

Examples  To remove VLAN 33 to RA Policy, RA-Guard, use the following syntax:

CLI network-admin@switch > ipv6security-raguard-vlan-remove name RA-Guard vlans 33

ipv6security-raguard-vlan-show

The IPv6 RA Guard feature provides support for allowing the network administrator to block or reject unwanted or rogue RA guard messages that arrive at the network device platform

Syntax   ipv6security-raguard-vlan-show

i

name name-string

Displays the name of the RA Guard policy to add VLANs.

vlans vlan-id

Displays the VLANs to add to the policy.

Syntax

Defaults   None

Access   Network Administrator

History   Command introduced in Version 3.0.0

Usage   Use this command to display a VLAN assigned to  an RA Guard policy.

Examples  To display for the RA Policy, RA-Guard, use the following syntax:

CLI network-admin@switch > ipv6security-raguard-vlan-show name RA-Guard vlans 33