lacp-show

This command is used to display information about Link Aggregation Control Protocol (LACP) configurations on the switch.

Syntax   lacp-show

switch

switch-name

Specifies the name of the switch in the configuration.

enable|disable

Specifies if LACP is enabled or disabled.

system-priority

priority

Specifies the priority for the configuration. The default value is 32768 with a range of 1 to 65535.

system-id

id-string

Specifies the ID of the switch in the configuration. LACP uses the system priority with the MAC address to form the system ID and also during negotiation with other systems.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   Command introduced in Version 1.2

Usage   Use this command to display information about the LACP configuration.

Examples  To display LACP information, use the following syntax

CLI network-admin@switch > lacp-show

switch:              pleiades24

enable:              yes

system-priority:     32768

systemid:800640e942c007a

switch:              pleiades32

enable:              yes

system-priority:     32768

systemid:800640e942c0143

 

See Also