OpenStack is a cloud operating system that controls large pools of compute, storage, and networking resources throughout a data center. This command is used to display information about an OpenStack node on a VNET.

Syntax   openstack-config-node-show openstack-name name-string openstack-bridge-vnic-nic nic-string [hostname hostname-string] addr ip-address macid mac-address [type controller|compute|unknown] platform platform-string 
[status online|offline|installing|failed]

openstack-name name-string

Specifies the name of the OpenStack node.

openstack-bridge-vnic-nic nic-string

Specifies the name of the virtual NIC assigned to theinterface.

Specify the following node arguments:

hostname hostname-string

Specifies the host name for the node.

addr ip-address

Specifies the IP address for the node.

macid mac-address

Specifies the MAC address for the node.

type controller|compute|

Specifies the type of node.

platform platform-string

Specifies the type of platform.

release release-string 

Specifies the OpenStack release on the node.

status online|offline|

Specifies the status of the node.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.


Display output in ascending order.


Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.


Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.


Display the number of entries in the output. This is useful with vRouter show commands.


Display full values in the output instead of scaled approximate values.


Display integer values instead of mapped values


Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI


Version 2.0

Command introduced.

Version 2.3

The parameters, platform and release, added.

Version 2.3.1

Command changed to openstack-config-node-show.

Usage   Use this command to display information about a node in the OpenStack instance.

Examples  To display a node, openstack-node1, host name, openstack, IP address type controller, use the following command:

CLI (network-admin@aquila13) > openstack-config-node-show

openstack-name hostname            addr        macid             type       status

-------------- --------------- ----------- ----------------- ---------- ------

ops202        controller 66:0e:94:23:3c:24 controller online

ops202        compute-100-202 00:e0:81:e4:02:97 compute    online

See Also