openstack-config-show

OpenStack is a cloud operating system that controls large pools of compute, storage, and networkingresources throughout a data center. This command is used to display an OpenStack instance on a VNET.

Syntax   openstack-config-show name name-string vnet vnet-name port port-number vlans vlan-list dedicated-vnet-service|shared-vnet-service disable|enable [scope local|fabric] [ha|no-ha] [ha-vip ip-address] [ha-vip-netmask netmask] [release icehouse|juno] [plugin ml2|ovs] [extensions|no-extenstions] [enable-nat|no-enable-nat]

name name-string

Specifies the name of the OpenStack instance.

scope local|fabric

Specifies the scope of the VNET.

vnet vnet-name

Specifies the name of the VNET.

port port-number

Specifies the port number for the Openstack instance.

vlans vlan-list

Specifies the list of VLANs assigned to OpenStack.

vrg vrg-name

Specifies the Virtual Resource Group (VRG) assigned to OpenStack.

release icehouse|juno

Specifies the OpenStack release type.

plugin ml2|ovs

Specifies the OpenStack plugin type.

extensions|
no-extensions

Specifies if extensions are displayed or not.

ha|no-ha

Specifies if High Availability (HA) is enabled.

node_location fabric-node name

Specifies the location of the zone or container on the local node.

ha_location fabric-node name

Specifies the location of the zone or container for HA peer.

node_ident

Specifies the node ID for the local node.

ha_ident

Specifies the node ID for the HA peer.

zone_ident

Specifies the ID for the OpenStack zone.

ha_zone_ident

Specifies the ID for the secondary VNM zone.

ha-vip ip-address 

Specifies the HA IP address.

ha-vip-netmask netmask

Specifies the HA IP address netmask.

cluster cluster-name

Specifies the cluster name.

enable-nat|no-enable-nat

Specifies if NAT is enabled or not.

http-port http-port-number

Specifies the HTTP port number.

ssh-port ssh-port-number

Specifies the SSH port number.

vnc-port vnc-port-number

Specifies the VNIC port number.

 

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.3.1

Command introduced.

Version 2.6.0

The parameters, glance-folder and glance-vfolder, deprecated.

Usage   Use this command to display information about an OpenStack instance.

Examples  To display the OpenStack instance, Open-One, use the following command:

CLI (network-admin@pleiades25) > openstack-config-show format all layout vertical

id:                 b000023:2

name:               ops202

type:               openstack

scope:              fabric

vnet:               vnet202

vnet-service:       shared

state:              enabled

location:           aquila13

storage-pool:       pool-disk1

gateway:            10.12.1.1

template:           no

port:               25000

vlans:              100-120

storage:            0

vrg:                OS-ops202-vrg

release:            havana

controller-pool:    pool-disk1

extensions:         false

id:                 b000023:19

name:               ops198

type:               openstack

scope:              fabric

vnet:               vnet198

vnet-service:       shared

state:              enabled

location:           aquila13

storage-pool:       pool-disk1

gateway:            ::

template:           no

port:               25000

vlans:              122-140

storage:            0

vrg:                OS-ops198-vrg

release:            havana

controller-pool:    pool-disk1

extensions:         false

 

See Also