openvswitch-modify

Open vSwitch is a multilayer virtual switch licensed by Apache 2.0. It is designed to enable massive network automation through programmable extensions. This command modifies an Open vSwitch instance on the switch.

Syntax   openvswitch-modify name name-string [gateway ip-address] [tunnel-ip ip-address] [global-vtep|local-vtep] [cert-name cert-name-string][ca-cert-name ca-cert-name-string] [cert-location none|global|container] [location fabric-node name]

name name-string

Specify a name for the Open vSwitch instance.

Specify between 0 and 7 of the following options:

gateway ip-address

Specify the gateway IP address.

tunnel-ip ip-address

Specify the IP address for the tunnel.

global-vtep|local-vtep

Specify the hardware VTEP associated with Open vSwitch.

cert-name cert-name-string

Specify the certificate name for SSL connections

ca-cert-name ca-cert-name-string

Specify the CA Certificate name for SSL connections

cert-location none|global|container

Specify the Certificate location - global or within container

location fabric-node name

Specify the location of the service.

storage-pool storage-pool-name

Specify a storage pool to apply to the VNET.

bfd|no-bfd

Specify if you want to enable BFD for OVSDB created tunnels.

 

Defaults   None

Access   CLI

History   

Version 2.4

Command introduced.

Version 2.4.1

The parameters vnet, dedicated-vnet-service|shared-vnet-service disable|enable, storage-pool, gateway db-conn-type, db-ip, db-port, db-socket deprecated.

Version 2.5.4

The parameters, cert-name, ca-cert-name,and cert-location added.

Version 3.0.0

The parameter, bfd, added.

Command introduced in Version 2.4.

Usage   Use this command to modify an Open vSwitch instance on a VNET and to accept TLS certificates.

Examples  To modify an Open vSwitch instance, Open-One, on VNET, opvnet, and add the database IP address, 10.9.31.141, use the following command:

openvswitch-create name Open-One vnet opvnet db-ip 10.9.31.141