snmp-v3-trap-sink-show

This command is used to display information about a SNMPv3 trap receiver for SNMP traps.

Syntax   snmp-trap-sink-show user-name user-name-string engine-id engine-id-string trap TRAP_TYPE_V3_TRAP|TRAP_TYPE_V3_INFORM] dest-host dest-host-string dest-port dest-port-number

user-name user-name-string

Specifies the user name to send traps.

engine-id engine-id-string

Specifies the SNMP engine ID.

type TRAP_TYPE_V3_TRAP|
TRAP_TYPE_V3_INFORM

Specifies the type of SNMP trap.

dest-host dest-host-string

Specifies the destination host.

dest-port dest-port-number

Specifies the destination port.

auth|no-auth

Specifies if authentication is required. This value is created when the user is configured.

priv|no-priv

Specifies if the user has privileges or not. This value is created when the user is configured.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   CLI

History   

Version 2.0

Command introduced.

Version 2.4

The options, TRAP_TYPE_V1_TRAP|TRAP_TYPE_V2C_TRAP|TRAP_TYPE_V2_INFORM deprecated.

Usage   Use this command to display information about an SNMPv3 receiver configuration.

Examples  To display information about an SNMPv3 receiver, use the following command:

CLI network-admin@switch > snmp-v3-trap-sink-show

See Also