switch-route-show

This command is used to display basic setup parameters for a switch.

Syntax   switch-route-show

network ip-address

Displays the destination IPv4 or IPv6 address.

netmask netmask

Displays the destination netmask.

Specify one or more of the following options:

gateway-ip ip-address

Displays the gateway IPv4 or IPv6 address.

nic switch-nic nic

Displays the NIC.

metric integer

Displays the metric for the route as an integer between 1 and 4294967295.

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None.

Access   CLI

History   

Version 2.3.0

Command introduced.

Version 3.0

The parameter, metric, added.

Usage   This command is useful for Layer 3 communication on the fabric.

Examples  To display basic parameters, use the following command:

CLI network-admin@switch > switch-route-show

See Also   

switch-route-create

switch-route-delete

switch-route-modify