trunk-stats-show

This command is used to display information about trunk statistics.

Syntax   trunk-stats-show

Specify any of the following options:

time date/time: yyyy-mm-ddThh:mm:ss

Specifies a time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

YYYY specifies the 4 digit calendar year;

MM specifies the 2 digit month of the year;

DD specifies the 2 digit day of the month;

HH specifies the 2 digit time of the day (24H notation);

MM specifies the 2 digit minute of the hour;

SS specifies the 2 digit second of the minute

start-time start-time

Specifies a start time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

YYYY specifies the 4 digit calendar year;

MM specifies the 2 digit month of the year;

DD specifies the 2 digit day of the month;

HH specifies the 2 digit time of the day (24H notation);

MM specifies the 2 digit minute of the hour;

SS specifies the 2 digit second of the minute.

end-time end-time

Specifies an end time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

YYYY specifies the 4 digit calendar year;

MM specifies the 2 digit month of the year;

DD specifies the 2 digit day of the month;

HH specifies the 2 digit time of the day (24H notation);

MM specifies the 2 digit minute of the hour;

SS specifies the 2 digit second of the minute.

duration duration

Specifies the duration in seconds.

interval duration: #d#h#m#s

Specifies the interval between statistics collection.

since-start|
no-since-start

Specifies if the statistics are collected from the start of collecting statistics.

older-than duration: #d#h#m#s

Specifies if the statistics are older than the duration in days, hours, minutes, and seconds.

within-last duration: #d#h#m#s

Specifies if the statistics are within the duration in days, hours, minutes, and seconds.

port port-list

Specifies one or more switch network data port numbers. The port number must be in the range of 1 to 64. Multiple ports can be specified as a comma-separated list of numbers or a range (-).

counter counter-number

Specifies the counter number.

ibytes ibytes-number

Specifies the incoming number of bytes.

ibits ibits-number

Specifies the number of incoming bits.

iUpkts iUpkts-number

Specifies the number of incoming unicast packets.

iBpkts iBpkts-number

Specifies the number of incoming broadcast packets.

iMpkts iMpkts-number

Specifies the number of incoming multicast packets.

iPauseFs iPauseFs-number

Specifies the number of incoming pause frames.

iCongDrops iCongDrops-number

Specifies the number of incoming packets dropped due to congestion.

idiscards idiscards-number

Specifies the number of incoming packets discarded.

ierrs ierrs-number

Specifies the number of incoming errors.

obytes obytes-number

Specifies the number of outgoing bytes.

obits obits-number

Specifies the number of outgoing bits.

oUpkts oUpkts-number

Specifies the number of outgoing unicast packets.

oBpkts oBpkts-number

Specifies the number of outgoing broadcast packets.

oMpkts oMpkts-number

Specifies the number of outgoing multicast packets.

oPauseFs oPauseFs-number

Specifies the number of outgoing pause frames.

oCongDrops oCongDrops-number

Specifies the number of outgoing packets dropped due to congestion.

odiscards odiscards-number

Specifies the number of outgoing discarded packets.

oerrs oerrs-number

Specifies the number of outgoing errors.

mtu-errs mtu-errs-number

Specifies the number of MTU errors.

HER-packets HER-pts-number 

Specifies the number of Head End Replicated (HER) packets.

HER-bytes HER-bytes-number

Specifies the number of Head End Replicated (HER) bytes.

 

Formatting Options

format fields-to-display

Display output using a specific parameter. Use all to display all possible output.

parsable-delim character

Display output formatted for machine parsing using a specified delimiter.

sort-asc

Display output in ascending order.

sort-desc

Display output in descending order.

show dups

Display duplicate entries in the output.

layout vertical|horizontal

Format the output in a vertical or horizontal layout.

show-interval seconds-interval

Repeat the show command at a specified interval.

show-headers|
no-show-headers

Display column headers or not.

limit-output number

Limit the display output to a specific number of entries.

count-output

Display the number of entries in the output. This is useful with vRouter show commands.

unscaled

Display full values in the output instead of scaled approximate values.

raw-int-values

Display integer values instead of mapped values

sum-by

Aggregate output by specific parameters. If sum-by fields are specified, records that have the same value in sum-by fields are combined and displayed as one aggregate record. NOTE: This option is only available for show commands that collect statistics such as connection-stats-show.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to display statistics about a trunk configuration.

Examples  To display statistics for a trunk configuration, use the following syntax:

CLI network-admin@switch > trunk-stats-show

See Also